To change the gasket use an awl or a slim flat-
head screwdriver and at first remove one edge of
the gasket and then remove it entirely.
If the unit is worn out just insert shims under the
gasket so as to reduce the stroke of the filter
holder.
4.1 REMOVAL OF SHOWER AND
GASKET
To remove the shower and pavilion it is suf
ficient
to loosen the central screw under the unit.
WARNING
If the machine was turned off recently, protect
yourself with thermal insulation gloves.
Edition 01 of 08/2017
4.4
SERVICE MANUAL
Fig. 91
Fig. 89
Fig. 90