Edition 01 of 08/2017
6.4
SERVICE MANUAL
Fig. 149
Fig. 151
Fig. 150
1 Turn off the water tap on the pump, to pre-
vent it from injecting new water and there are
no leakages.
6.3 EMPTYING OF THE COFFEE
BOILER
To operate safely when replacing parts of the
boiler, it may be necessary to empty the boiler
completely. Before working on the machine
insert the "CLOCK DISABLED" mode. Turn off
the machine until the OFF message is displayed.
Hold the cleaning button pressed until the words
"CLOCK DISABLED" appear.
At this point you can operate freely:
3 After unscrewing the fitting that carries water
in the boiler using a No. 12 wrench, insert a
Teflon tube to connect the coffee boiler with
the draining pan.
2 Remove the safety thermal fuse to have
more space in which to operate.
To Next Page
Loading...
Need help?
General
