PAGE 21 of 32 DIGITAL GSM INTERCOM TECHNICAL MANUAL VER2.1.1
Example: To change the code to 123456 in apartment 20 would be the following SMS
message:-
1111STC20:”123456”?
The ? is optional
CHANGING AN APARTMENTS DIAL TO OPEN SETTING (STO)
Each apartments telephone numbers can be used as dial to open numbers. When this
setting is set to 1, dial to open is enabled and when set to 2, dial to open is disabled. When
enabled, calling the digital panel’s telephone number from that apartments telephone
numbers will release the door and end the call automatically without any charge. When
this feature is disabled, dialling the digital panel’s telephone number from that apartments
telephone numbers will open the speech to the panel and allow all functions available
during a call.
1111STOn:y Change the dial to open setting to y for apartment n. n
can be 1-6 digits. y can be 1 to enable to 2 to disable.
1111STOn: y? Change the dial to open setting to y for apartment n. n
can be 1-6 digits. y can be 1 to enable to 2 to disable. A
confirmation text message is returned to confirm the
storage of the new setting.
1111STOn:? Query the dial to open setting for apartment n. A text
message will be sent to the sender with the stored
setting for that apartment.
CHANGING AN APARTMENTS TIME BAND SETTING (STB)
Each apartment’s calls from the panel can be restricted to a certain time band. There are
10 time bands to choose from 0-9. 0 is a 24-7 time band with no restriction of calls while 1-
9 can be programmed to any required times. To change the time band associated with a
certain apartment:
1111STBn:y Change the time band setting to y for apartment n. n
can be 1-6 digits. y can be 0-9.
1111STBn: y? Change the time band setting to y for apartment n. n
can be 1-6 digits. y can be 0-9. A confirmation text
message is returned to confirm the storage of the new
setting.
1111STBn:? Query the time band setting for apartment n. A text
message will be sent to the sender with the stored
setting for that apartment.
CHANGING AN APARTMENTS NAME (STT)
Each apartment can have a unique name from 1-16 characters in length. To change or
query this name send the following commands:-
To Next Page
Loading...
Need help?
General
