Volvo Penta D2-55 Workshop Manual

9
Special tools
Wherever feasible, the tool numbers have been punched on the tools.
856 927
885 252
885 820 9812519
999 6662
999 9179
384 9641
885 485
856 927 Plastigauge, for measuring main and big-
end bearing play
884 892 Regulator tester
885 023 Valve spring compressor
885 252 Adapter for testing compression pressure
885 484 Adapter for testing compression pressure
885 485 Engine fixture for overhaul stand
885 820
1)
Puller for pulleys
885 822 Magnetic pen
885 498 Pressure foot (used together with valve
spring compressor 885 023)
981 2519 Multimeter
998 8539 Compression tester
998 9876 Dial indicator
999 5919 Puller, seals
999 6662 Pressure testing equipment
999 9179 Wrench for removing fuel/oil filters
999 9684 Rocker indicator
999 9696 Magnetic stand
999 9772 Injector tester
384 9641 Assembly tool for oil pump shaft
998 6485 or 999 2520 Overhaul stand
1)
This tool is used with one or more of Volvo Penta’s older products
998 8539
885 822
999 9772
998 9876
999 9696
998 6485 or 999 2520
999 9683
884 892
885 484885 023
885 498
999 5919

Volvo Penta D2-55 Specifications

General

Engine Type	Diesel
Number of Cylinders	4
Power Output	55 hp
Aspiration	Naturally aspirated
Alternator	115 A
Fuel System	Direct injection
Bore x Stroke	84 mm x 100 mm
Cooling System	Freshwater cooling with heat exchanger
Width	523 mm
Displacement	2.2 l (134 cu in)