Technical Data
Engines
Engine Specifications
P0019970
Model
Displacement
Comp.
Bore/
StrokeL cu.in.
V6–200 4.3 262 11.0:1 99.6/92
V6–240 4.3 262 11.0:1 99.6/92
V6–250 4.3 262 11.0:1 99.6/92
V6–280 4.3 262 11.0:1 99.6/92
V8–300 5.3 323 11.0:1 96/92
V8–350 5.3 323 11.0:1 96/92
V8–380 6.2 376 11.5:1 103/92
V8–430 6.2 376 11.5:1 103/92
(2) (3) (4)
Engine RPM Range
Engine RPM Range
V6 5400 – 5800
V8–300, V8–350 5400 – 5800
V8–380, V8–430 5600 – 6000
NOTICE! If the engine exceeds maximum RPM or can
not reach the RPM range at full throttle (wide open
throttle, or WOT), especially for extended periods, this
is an indication of problems with the boat, engine or
propeller(s). Engine damage may occur if the engine
is operated at these conditions. This type of damage
is not covered by warranty.
The engine should not be operated at RPMs above the
RPM range. If the engine is routinely exceeding the
maximum RPM or is frequently at the RPM limit
controlled by the engine computer, the boat should be
taken to the dealer to check for proper propeller size.
If the engine will not reach the RPM range, the boat
may be overloaded or over-propped and should be
taken to the dealer for correction.
Either condition can lead to serious engine damage if
not corrected.
Idle RPM for these engines is 650. This is controlled
by the engine computer and can not be adjusted.
2. cubic inches
3. compression ratio
4. millimeters
106 47712779 09-2020 © AB VOLVO PENTA
To Next Page
Loading...
Need help?
General
