Powertrim Control
The trim system is controlled by trim switches located
on the control lever.
Upward button movement raises the drive up, or away
from the transom.
Downward button movement lowers the drive, or
towards the transom.
Complete instructions on trim system use are included
in Powertrim/Tilt, page 36.
Trim Gauge
Trim gauges show the relative position of the boat’s
bow, based on the drive trim angle.
The digital instrument shows the trim angle in numbers
and the trim range (TRIM) and beach range (BEACH)
in text. The higher the number, the higher the bow
position.
The analog trim instrument shows the bow position
based on the current position of the drive. This
instrument has three ranges:
3. Tilt range
2. Beach range
1. Trim range
For an explanation of trim ranges, refer to Trim
Ranges, page 38.
Gauges shown are from Volvo Penta. Other trim
gauges use similar functionality and terminology.
P0018174
P0018175
Instruments and Controls
22 47712779 09-2020 © AB VOLVO PENTA
To Next Page
Loading...
Need help?
General
