Declaration of Conformity
Declaration of Conformity for Recreational Craft Propulsion Engines with the sound and exhaust emission
requirements of Directive 2013/53/EU.
Engine Manufacturer: Volvo Penta of the Americas, 1300 Volvo Penta Drive, Chesapeake, VA 23320, USA
Body for exhaust emission assessment
International Marine Certification Institute
Rue Abbé Cuypers 3 / B-1040 Bruxelles / Belgique
ID Number: 0609
Modules used for exhaust emission assessment
B+C
EC Type Examination
Body for sound emission assessment
International Marine Certification Institute
Rue Abbé Cuypers 3 / B-1040 Bruxelles / Belgique
ID Number: 0609
Module used for sound emission assessment
A1
International production control
Test according to Annex VI
Other Community Directives applied: 2014/30/EU
Description of engines and essential requirements: 4-stroke gasoline with stern drive & integral exhaust.
Engine model(s) covered by this declaration
Engine
Model(s)
Nominal
Power
Exhaust:
EC Type
Certificate
Number
Sound:
EC Type
Certificate
Number
Engine
Model(s)
Nominal
Power
Exhaust:
EC Type
Certificate
Number
Sound:
EC Type
Certificate
Number
V6–200–C/CE 149 kW EXVOL017 SDVOL020 V8–300–C/CE 224 kW EXVOL019 SDVOL024
V6–240–C/CE 179 kW EXVOL017 SDVOL021 V8–350–C/CE 261 kW EXVOL019 SDVOL024
V6–250–C/CE 186 kW EXVOL017 SDVOL021 V8–380–C/CE 283 kW EXVOL021 SDVOL025
V6–280–C/CE 209 kW EXVOL020 SDVOL022 V8–430–C/CE 321 kW EXVOL021 SDVOL019
Essential Requirements Standards Used
Other Normative
Documents Used
Annex I.B – Exhaust Emissions
Engine identification Volvo Penta std Annex I.B.1
Exhaust emission requirements EN ISO 18854:2015 Annex I.B.2
Durability Volvo Penta std Annex I.B.3
Operator’s manual ISO 10240:2004/Amd 1:2015 Annex I.B.4
Annex I.C – Noise Emissions
Sound emission levels EN ISO 14509-1:2008 Annex I.C.1
Operator’s manual ISO 10240:2004/Amd 1:2015 Annex I.C.2
EMC Directive EN 60945, EN 55012, EN 5022
This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of
the engine manufacturer that the engine(s) mentioned above complie(s) with all applicable essential requirements
in the way specified and is in conformity with the type for which above mentioned EC type examination
certificate(s) has been issued.
Name and function:
Emil Hasl
Manager Product Compliance
Signature:
(identification of the person empowered to sign on behalf of the engine
manufacturer or his authorised representative)
Date and place of issue: 2020/07/14, Chesapeake, VA
Notes:
This Declaration of Conformity applies to –G engine models and later, and does not apply to boats using through-
hull exhaust systems.
Technical Data
116 47712779 09-2020 © AB VOLVO PENTA
To Next Page
Need help?
General
