Certified Engines
If you own an engine certified for any area where
exhaust emissions are regulated by law, the
following is important:
Certification means that an engine type is inspected
and approved by the authorities. The engine
manufacturer guarantees that all engines
manufactured of that type correspond to the certified
engine.
This places special requirements for maintenance
and service as follows:
•
The maintenance and service intervals
recommended by Volvo Penta must be observed.
•
Only genuine Volvo Penta replacement parts may
be used.
•
The servicing of ignition, timing, and fuel injection
systems must always be carried out by an
authorized Volvo Penta workshop.
•
The engine must not be modified in any way except
with accessories and service kits approved by Volvo
Penta.
•
No modifications to the exhaust pipes and air supply
ducts for the engine may be undertaken.
•
Seals may only be broken by authorized personnel.
Otherwise the general instructions contained in this
Operator’s Manual concerning operation, service, and
maintenance must be followed.
NOTICE! Late or inadequate maintenance/service or
the use of spare parts other than Volvo Penta original
spare parts will invalidate Volvo Penta’s responsibility
for the engine specification being in accordance with
the certified variant.
Volvo Penta accepts no responsibility or liability for any
damage or costs arising due to the above.
Maintenance
84 47712779 09-2020 © AB VOLVO PENTA