D
Group 177 Design and Function
T-Ride And B-Ride Equalizer Beam
Note: Some vehicles are equipped with newer versions
of the T-Ride & B-Ride Suspensions that use conical
bushings. These vehicles do not require lubrication.
For further information concerning component
specifications see service information in Group 1, “Oil and
Filter Change Intervals for Volvo Components,” publication
number 175-60, “Approved Oils Lists, Volvo Components”,
Publication Number 175–61, and appropriate vendor
literature.
In regular over-the-road operations the T-Ride and B-Ride
should follow the normal lubrication schedule.
It is extremely important that the equalizer beam is well
lubricated in any off-road or on/off-road operation. If there
are other severe duty constraints, for example driving in
water, lubricate more frequently, up to once per day, if
necessary.
For further information on the T-Ride and B-Ride
Equalizer Beam, refer to service literature in Function
Group 7.
W6000838
Early version suspension shown (requires
lubrication)
Cab
Doors
Door lock mechanism should be greased once per year
using white lithium grease. Coat the door stop arm with
grease every year.
W8003203
23
To Next Page
Loading...
Need help?
General
