19
Store a photo speed dial entry
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to scroll to Direct
memory, then press SELECT.
3. Press q or p to scroll to M1, M2, M3,
M4, M5, M6, M7 or M8, and then press
SELECT twice.
4. When the handset display NUMBER:,
use the dialing keys to enter the
number (up to 30 digits).
5. Press SELECT to move on to enter the
name. The handset displays NAME:.
6. Use the dialing keys to enter the name
(up to 15 characters). Additional key
presses show other characters of that
particular key. The first character of
every word is capitalized.
7. Press SELECT to save. You hear a
confirmation tone.
While entering names and numbers, you
can:
• Press DELETE to backspace and erase a
digit or character.
• Press and hold DELETE to erase the
entire entry.
• Press q or p to move the cursor to the
left or right.
• Press and hold PAUSE to insert a dialing
pause (for entering numbers only).
• Press 0 to add a space (for entering
names only).
Insert photos for speed dial keys
You can insert photos into the photo speed
dial compartments on the telephone base,
or write the contact names on cards and
insert them into the compartments.
• The telephone base is shipped with
protective stickers covering the photo speed
dial compartments. Remove the protective
sticker before use.
1. Remove the photo speed dial
compartment cover.
2. Crop your desired photo into the size
specified below, and then insert it into
the photo speed dial compartment.
Then, insert the photo speed dial
compartment cover back to the
compartment.