BA 1404 en – Edition 2.7 * 1404b320.fm 3-7
Operation
3.6 Check lists
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists are not intended to be exhaustive; they intend to support only during ful-
filling of due care obligation.
The checking and monitoring work listed below is described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Start-up checklist
Check the following points before putting the machine into operation or starting the engine:
:
No.
Question
✔
1
Enough fuel in the tank? (➠ 5-2)
2
Coolant level OK? (➠ 5-9)
3
Water drained from the fuel prefilter? (➠ 5-5)
4
Engine oil level OK? (➠ 5-6)
5
Oil level in hydraulic oil reservoir OK? (➠ 5-21)
6
Water level in washer tank OK? (➠ 3-32)
7
V-belt condition and tension checked? (➠ 5-18 / 5-19)
8
Lubrication points greased? (➠ 5-29)
9
Tracks checked for cracks, cuts, etc.? (➠ 5-27)
10
Lights, signals, indicators, warning lights and indicator lights OK?
(➠ 3-30)
11
Windows, mirrors, lights and steps clean?
12
Control lever base lowered? (➠ 3-42)
13
Attachment safely locked? (➠ 3-70)
14
Engine cover safely locked? (➠ 3-42)
15
Especially after cleaning, maintenance or repair work:
➥ Rags, tools and other loose objects removed?
16
Seating position adjusted correctly? (➠ 3-33)
17
Seat belt fastened? (➠ 3-34)
18
Anyone in the danger zone of the machine?
To Next Page
Loading...
Need help?
General
