22
PXM
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
Quantity Order No. Designation
1 see Chapter 5.4.1 PXM powder center
The standard equipment includes:
1 Declaration of incorporation
1 2350371 Operating and assembly manual, German
1 see Chapter 1.3 Operating and assembly manual in the local language
5.4 SCOPE OF DELIVERY
5.4.1 DESIGN VARIANTS OF THE PXM POWDER CENTER
Basic Module:
Order No. Designation
2350977 Powder center PXM 20/22 IF standalone, without ultrasonic sieve
2350980 Powder center PXM 20/22 FF standalone, without ultrasonic sieve
2359437 Powder center PXM 34 IF standalone, without ultrasonic sieve
Powder center PXM 34 FF standalone, without ultrasonic sieve
Expansion Modules*:
Order No. Designation
2350981 Injector set PI-F1
2350982 Injector set HiCoat-ED
2350983 Set EPG S2
2350984 EPG rack 1–11 for PXM 20/22
2359443 EPG rack 1–18 for PXM 34
2350987 Vibration table container/box
2350988 Box uidizing device (only possible for PXM 20/22)
2350990 Box fresh powder addition
2341584 External valve cabinet for single-plug conveyor
2353462 Extension set ultrasonic sieve device 160 μm
2353306 Extension set ultrasonic sieve device 200 μm
2353302 Controller extension bigbag (without bigbag)
2350985 Set connection material for injectors and EPG including installation
* Expansion modules can be used only in conjunction with an order of the basic module.
Product-speci c limitations, e.g., ow rates must be observed and taken into account during the con guration.
To Next Page
Loading...
Need help?
General
