30
PXM
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
6 ASSEMBLY AND COMMISSIONING
6.1 TRAINING THE ASSEMBLY STAFF
Incorrect installation/operation!
Risk of injury and damage to the device.
The assembly and commissioning sta must have the technical
skills to safely commission the device.
When assembling, commissioning and performing all work,
please read and observe the operating manual and safety
regulations of the additionally required system components.
WARNING
6.2 STORAGE CONDITIONS
Until the point of assembly, the powder center must be stored in a dry location, free from
vibrations and with a minimum of dust. The powder center must be stored in closed rooms.
The air temperature at the storage location must be between +10 °C and +20 °C
(+50 °F and +68 °F).
The relative air humidity at the storage location must be between 20 and 70%
(without condensation).
6.3 INSTALLATION CONDITIONS
The air temperature at the installation site must lie between +10 °C and +30 °C
(+50 °F and +86 °F).
The relative air humidity at the installation site must be between 20 and 70%
(without condensation).
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
To Next Page
Loading...
Need help?
General
