3
PXM
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
Table of Contents
1 ABOUT THESE INSTRUCTIONS 7
1.1 Preface 7
1.2 Warnings, Notices, and Symbols in this Operating Manual 7
1.3 Languages 8
1.4 Abbreviations 8
1.5 Terminology for the Purpose of this Manual 9
2 CORRECT USE 10
2.1 Device Type 10
2.2 Type of Use 10
2.3 Use in Potentially Explosive Areas 10
2.4 Safety Parameters 10
2.5 Processible Working Materials 11
2.6 Reasonably Foreseeable Misuse 11
2.7 Residual Risks 11
3 IDENTIFICATION 12
3.1 Explosion Protection Identi cation 12
3.2 Permissible Device Combinations 12
3.3 Type Plate 12
3.4 Note on the Ex-Zone Classi cation by the Operator 13
4 GENERAL SAFETY INSTRUCTIONS 14
4.1 Safety Instructions for the Operator 14
4.1.1 Electrical Devices and Equipment 14
4.1.2 Personnel Quali cations 14
4.1.3 Safe Work Environment 14
4.2 Safety Instructions for Sta 15
4.2.1 Safe Handling of WAGNER Powder Spray Devices 15
4.2.2 Grounding the Device 15
4.2.3 Product Hoses 15
4.2.4 Cleaning 16
4.2.5 Handling Powder Lacquers 16
5 DESCRIPTION 17
5.1 Components 17
5.1.1 Version with Integrated Filter 18
5.1.2 Version for Final Filter 19
5.1.2 Version with Ultrasonic Sieve 20
5.2 Mode of Operation 21
5.3 Protective and Monitoring Equipment 21
5.4 Scope of Delivery 22
5.4.1 Design Variants of the PXM Powder Center 22
5.4.2 Type with Ultrasonic Screening Unit 23
5.4.3 Installation Dimensions for Ultrasonic Screening Unit 23
5.5 Technical Data 24
5.6 Controls 25
5.7 Screen Layout of the Touch Screen 26
5.8 Explanation of the Screen Page Numbers 27
5.9 Inputs on the Touch Panel 28
To Next Page
Loading...
Need help?
General
