32
PXM
P_02573
P_02574
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
Transport in the factory workshop Support with wooden beams on the
lter module
6.5 ASSEMBLY AND INSTALLATION
Danger from electric current!
Risk of injury and damage to the device.
Before connecting the device, ensure that the external controller
is switched o and the EMERGENCY STOP button is actuated.
WARNING
The device may only be put into operation if it complies with the essential requirements of
Directive 2006/42/EC after installation.
The requirements of the relevant paragraphs must be met in particular:
– 1.1.4 Illumination
– 1.2.4.1 Normal shutdown
– 1.2.4.3 Emergency shutdown
– 1.2.4.4 Assemblies of machinery
– 1.2.5 Selecting the control or operating modes
– 1.2.6 Power supply malfunction
– 1.3.7 Risks from moving parts
– 1.3.8 Selection of protective equipment against risks from moving parts
– 1.5.6 Fire
– 1.5.16 Lightning
– 1.7.1.2 Warning devices
To Next Page
Loading...
Need help?
General
