WAGNER EPG-Sprint X User Manual

62
PXM
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
7.7.3 MACHINE PARAMETER CLEANING
Home page
Cleaning
Settings
Alarm
US sieve
Diagnosis
MP
cleaning
Settings System
Yes
FP
supply
RP
supply
Home page
Cleaning
Settings
Alarm
US sieve
DiagnosisSettings System
Block 2
FP
supply
RP
supply
Standard
Block 1
Communication with the application controller
No
InjectorsInterface
Standard
On
O
Block 2Block 1
CleaningPre-cleaning Dynamics
Interface Injectors
Parameter: Explanation:
Communication with the
application controller
Yes: The powder center controller communicates with the
application controller
In doing so, the following information is exchanged in
conjunction with MCC, Pro Tech M or S Pro Tech:
- Move the guns to the cleaning position for internal cleaning
- Switch on the gun air during internal cleaning
- Switch o the gun air after internal cleaning  nishes
No: The powder center controller does not communicate
with the application controller
The settings in the "Cleaning" machine parameters can be optimized for customer-specific
requirements.
MP
operation
MP
operation
MP
cleaning

WAGNER EPG-Sprint X Specifications

General

Brand	WAGNER
Model	EPG-Sprint X
Category	Control Unit
Language	English