84
PXM
P_02685
P_02686
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
8. Plug the blowout hose onto the peristaltic pump connection.
9. Remove the fresh powder hose and to plug onto the blowout position (below).
10. Plug the dummy plugs onto the fresh powder connection.
11. Select main cleaning of the US sieve.
Home page
Cleaning
Settings
Alarm
Worker
Injector blow out On
On
O
O
End
On O FP pump intensive
On O
On O FP pump standard
RP hose
US Sieve
12. Remove all connections from the sieve cover.
13. Blow out the sieve cover.
14. Suction clean the sieve funnel with the suction gun and blow it out with the blow
gun.
15. Remove outlet hose and blow through.
16. Blow o sieve.
17. Mount all components again.
To Next Page
Loading...
Need help?
General
