60
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2354920
SPRINT XE
12.5.1 INSTALLATION OF THE SWITCHBOX
WARNING
Danger from electric current!
Risk of injury and damage to the device.
Before starting with the installation of the switchbox, the manual system must be
switched o and the mains plug disconnected.
1
2
3
P_01159
Procedure:
1. Screw switchbox (1) to adapter plate (3) with
screws (2).
4
P_01183
2. Use screws (4) to screw adapter plate with tted
switchbox onto the back side of trolley's front
plate.
P_02718
A
B
C
Connection for
Corona guns
Connection for
Tribo guns
3. Pull the spray gun cable out of the socket (A) on
the control unit.
4. Plug the switchbox's electrical cable (B) into the
socket (A) on the control unit and secure it with
the protective sleeve.
5. Connect the spray gun to the appropriate
connection on the switchbox and secure it with
the protective sleeve of the spray gun cable.
6. Set the switch (C) on the switchbox to the
desired spray gun type.
To Next Page
Loading...
Need help?
General
