WAGNER SPRINT XE User Manual

61
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2354920
SPRINT XE
12.5.2 SWITCHING THE GUN TYPES
Note:
Clean the powder residues from all powder-conveying parts thoroughly, before changing
to another gun type.
P_01785
EPG
SPRINT X
0
%
10
20
30
40
50
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
80
100
%
Tri
90
60
70
1
2
P_02719
Procedure:
(For example: switching from Corona to Tribo)
1. Switch o control unit with switch 1 on the rear or with "Standby" button 15 on the
front.
2. Change the coating powder from Corona to Tribo.
3. Disconnect the hose (2) (transparent, atomizing air) from the Corona gun and
connect it to the Tribo gun (Tribo air).
4. Disconnect the powder feed hose of the Corona spray gun from the powder injector
and connect the Tribo gun hose to the powder injector.
5. Set the switch (C) on the switchbox to Tribo.
6. Switch on control unit with switch 1 on the rear or with "Standby" button 15 on the
front.
Note:
Parameter C11, in the EPG-Sprint XE control unit device con guration, must be set to
"aut". No gun is selected at  rst after the control unit is switched on. This will however be
automatically selected and displayed after 1 second.

WAGNER SPRINT XE Specifications

General

Brand	WAGNER
Model	SPRINT XE
Category	Paint Sprayer
Language	English