What to do if my WAGNER SPRINT XE Paint Sprayer has no powder feed?
If the WAGNER Paint Sprayer isn't feeding powder, first check if the tank or powder tank is empty and refill it. Then, ensure the spray gun, powder feed hose, and powder suction system aren't clogged by blowing through them. Also, check if the feed air hose or powder feed hose is bent or kinked; straighten or replace them if necessary.
How to fix sputtering powder feed on a WAGNER SPRINT XE?
If you're experiencing sputtering powder feed with your WAGNER Paint Sprayer, it could be due to a low flow rate in the powder feed hose. Try increasing the total feed and dosing air, then readjust the ratio of the airs to each other. Also, make sure the powder feed hose isn't narrowed due to movement; consider using a hose with a thicker wall to prevent this. Fluctuations in compressed air can also cause sputtering; install compressed air storage directly in front of high consumption system components.
General| Flow Rate | Adjustable, up to 600 g/min |
|---|---|
| Weight | 16.5 kg |
| Hose Length | 15 m |
| Nozzle Size | Various, depending on application |
| Spray Pattern | Adjustable |
| Voltage | 230 V |
| Power Source | Electric |
To Next Page
