Wavecom W-CODE User Manual

22

First start WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V9.1.0
 Select a device number and click Close to save the entry. If you require more details regarding
remote connections and connection parameters see “W-CODE Device…” on page 52.
 The decoder is now ready for use. Apply a signal to the selected input or use the Media Player
Recorder to play back a WAV file.
 From the HF-Modes, VHF/UHF-Modes or Satellite menus a mode may be selected, e.g.,
PACTOR-II if a PACTOR-II signal is played back.
 Tune the demodulator to the correct center frequency and set the correct input level.
GUI
The user interface of the application conforms to standard WINDOWS interface guidelines. The main pro-
gram window is shown in this section. This is the window you will see after setup has been completed as
described in the preceding paragraphs.

Wavecom W-CODE Specifications

General

Brand	Wavecom
Model	W-CODE
Category	Media Converter
Language	English