WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V9.1.0 Additional Functions
325
 Press the numbered button on the left to see the current save paths at the bottom for that choice
You may set up to ten different path and filename settings. These are used so the user can quickly change
the save filenames when changing frequencies. When you change your receiver to another frequency,
simply select the correct choice button on the left to use the new filename settings.
Settings – Alarm
Alarm Monitor allows you to scan for up to ten different alarm strings at the same time. You may assign a
different audible alert to each alarm string. When Alarm Monitor has detected an alarm string, the alert
will sound immediately.
Proceed as follows:
 Enter an alarm string (max. 50 characters)
 Select a WAV file using the browse button on the right
 Check the Enable scan box to enable that alarm string
 Select the Match case box if you wish the alarm strings to be case sensitive
 Deselect the Sound audible alert box to disable all audible alerts
Note: Without sound hardware, you can only hear the default beep regardless of the WAV file settings. If
you leave the file name blank, or enter an incorrect filename, you will hear the default Windows beep
sound.
You may record your own WAV files. In this way any tune or sound may be used to indicate an alarm.
Settings - SMS
The settings in this dialog box are needed to create different files for each message. The filename will con-
sist of the date, time, computer name, card number and phone number.
Example: C:\Temp\19980626_215847_webradio_2_09418727060.sms
The file itself will contain just one text line which includes the detected alarm string.
Pager modes such as POCSAG often transmit duplicate text data lines. To prevent sending duplicate SMS
messages, a time delay can be specified. This prevents the identical message from creating a new SMS
message file for the duration of the specified delay. The time delay is specified for the contents of the
whole message, not the alarm string contained in the message.
To Next Page
Loading...
Need help?
General
