Winterhalter UC Series User Manual

Software | 4 | English
Operating instructions UC-Serie | 89014383; Version 2 | 19
Exit the menu
4.2.5 Timer
The timer can be used to programme the warewasher to switch on or off automatically at a specific time.
At the time of automatic start-up, the following requirements must be met:
– The door is closed.
– The local mains disconnector is switched on.
– The local water supply is open.
1 2
Item Name
1 Set a regular time
2 Set a non-recurring date
Setting a regular time
1
234
Item Name
1 Switch the timer off/on
2 Time for automatic switch-off
3 Time for automatic start-up
4 Select timer schedule
– Daily
– Mon–Fri, Sat–Sun
– Individual (a different time on each weekday)

Winterhalter UC Series Specifications

General

Model	UC Series
Category	Dishwasher
Energy Consumption	Varies by model and program
Type	Undercounter
Dimensions	Varies by model
Capacity	Varies by model
Wash Cycle Duration	Varies by program
Water Consumption	Varies by model and program
Noise Level	Varies by model
Detergent Dispensing	Automatic
Rinse Aid Dispensing	Automatic
Power Consumption	Varies by model
Dimensions (HxWxD)	Varies by model
Weight	Varies by model
Wash Programs	Standard, Intensive, Short