Cleaning and maintenance | 8 | English
Operating instructions UC-Serie | 89014383; Version 2 | 43
8.2 Topping up the regeneration salt
NOTE
Damage to the water softener
Chemicals such as detergent or rinse aid and other salts such as table salt or thawing salt will inevitably
damage the water softener.
Ø Fill only with regeneration salt or a pure evaporated salt with a maximum grain size of 0.4–7 mm.
Ø Only fill with water when commissioning the water softener for the first time.
Ø Top up the regeneration salt.
Ø Note:Danger of rust formation in the filling area as a result of salt residues! After filling the regeneration salt,
start a washing programme or the self-cleaning programme in order to wash away any salt residues that may be
present. We recommend starting the self-cleaning programme, as salt residues can have a negative impact on the
wash result.
To Next Page
Loading...
Need help?
General
