Machine description | 3 | English
Operating instructions UC-Serie | 89014383; Version 2 | 9
3 Machine description
3.1 Description of function
After the warewasher is switched on, the boiler and the tank are filled and heated up to the operating temperature. Once
the target temperatures are reached, the warewasher is ready for use.
The warewasher is fully automatic with programmes consisting of three steps: Wash, Drain and Rinse.
3.2 Overview
Item Description Item Description
1 Display 9 Filter bottom
2 Start button 10 Connection for supply hose
3 Door 11 Mains cable
4 Integral storage tanks for rinse aid and detergent
(optional)
12 Connection for on-site equipotential bonding sys-
tem
5 Strainer 13 Connection for waste water hose
6 Filter cylinder 14 Suction tube for rinse aid (optional)
7 Lower wash field 15 Suction tube for detergent (optional)
8 Integral water softener
(optional)
Energy (optional)
Note:Cold water connection required.
The Energy module of the warewasher includes a fan motor and a heat exchanger. The fan motor extracts the moist and
warm air (=vapours) out of the washing compartment and transfers the generated energy to the cold inlet water via a
heat exchanger.
Cool (optional)
Note:Cold water connection required.
The rinse temperature can be changed for warewashers with this option. Glasses are ready to be used again faster with
cold rinsing.
Integral water softener (optional)
Warewasher with built-in salt container for regeneration salt. The regeneration salt softens the inlet water and thus pre-
vents a build-up of limescale inside the warewasher and on the items being washed.
To Next Page
Loading...
Need help?
General
