Wolf Convection Steam Oven User Manual

Convection Steam Oven Operation 15
wolfappliance.com
Using the Temperature Probe
CHECKING AND CHANGING PROBE TEMPERATURE
The TEMP button toggles between displaying the actual
probe temperature and the set temperature.
1) To change the set probe temperature, press the
TEMP button twice until the display reads ‘Probe
Temperature’, then turn the control knob to set a new
temperature and press to select.
END OF COOKING
When the set probe temperature is reached, the oven
automatically turns off.
• ‘Probe temperature reached’ appears in the text
display, and the actual probe temperature appears in
the left digital display.
• The probe symbol will flash and an audible signal
will sound for 1 minute.
• Probe temperature may continue to rise due to residual
heat.
Preparing for First Use
P
lease take a moment to record the serial number of your
convection steam oven, the installation date and company
that performed the installation on page 42 of this guide.

Wolf Convection Steam Oven Specifications

General

Oven Type	Convection Steam Oven
Cooking Modes	Steam, Convection Steam, Convection, Broil, Bake, Roast, Warm, Slow Cook
Temperature Probe	Yes
Power Source	Electric
Voltage	120 V
Wattage	1800 W
Steam Generator	External
Control Type	Touchscreen
Preset Cooking Programs	Yes
Door	Drop-down
Finish	Stainless Steel