Xerox 4590 EPS/4110 EPS System Administration Guide
4-15
4. Setups
Auto job release
If an error occurs during a print job, you can set the time that
elapses until the current job is automatically cleared, and thereby
enables the completion of the next job. Errors that may occur
include a paper jam, the machine runs out of hard disk space,
etc. Once the current job is cleared, jobs that can be continued
are limited to those that only use parts of the machine not affected
by the error.
Set the value in the range 4 to 99 minutes, in 1 minute increments.
1. From the Machine Clock/Timers screen, select Auto Job
Release, and select Change Settings.
2. Select Off if you do not want to use this feature.
3. Select On to set the elapse time by using the , , or the
numeric keypad to enter a numeric quantity.
4. Select Save to save the settings and return to the previous
window.