Xerox 4590 EPS/4110 EPS System Administration Guide
5-1
5. Safety and Notices
Safety notices
This Xerox product and the recommended supplies are designed
and tested to meet strict safety requirements. These include
safety agency approval and compliance to established
environmental standards. Please read the following instructions
carefully before operating the product, and refer to them as
needed to ensure the continued safe operation of your product.
KEY POINT: The safety testing and performance of this product
have been verified using Xerox materials only.
WARNING: Any unauthorized alteration, which may include the
addition of new functions or connection of external devices, may
impact the product certification. Please contact your authorized
local dealer for more information.
Electrical safety
This product shall be operated from the type of electrical supply
indicated on the product data plate label. If you are not sure that
your electrical supply meets the requirements, please consult your
local power company for advice.
• Use only the power cord supplied with this equipment.
• This equipment is to be used on a branch circuit that has
larger capacity than rated ampere and voltage of the machine.
See data plate on the rear panel for the rated ampere and
voltage of this equipment. If the machine needs to be moved
to a different location, contact a Xerox Service Representative
or your authorized local representative or service support
organization.
• Plug the power cord directly into a correctly grounded
electrical outlet. Do not use an extension cord. If you do not
know whether or not an outlet is grounded, consult a qualified
electrician.
• Do not use a ground adapter plug to connect this equipment to
an electrical outlet that lacks a ground connection terminal.
To Next Page
Loading...
Need help?
General