Xerox 4110 System Administration Guide

Xerox 4590 EPS/4110 EPS System Administration Guide
4-55
4. Setups
Maximum login attempts
If system administrator ID authentication fails repeatedly, you can
set a limit beyond which further tries are not allowed. Set the
number of authentication attempts allowed between 1-10.
NOTE 1:The count is reset when the machine is restarted.
NOTE 2:To cancel the access rejection, shut down the machine
by switching off the power and switching it on again.
1. From the System Administrator Settings screen, select
Maximum Login Attempts.
If Off is selected, you can attempt to log in an unlimited
number of times.
2. To restrict the number of login attempts, select On.
3. With and , set the number of authentication attempts
allowed.
4. Select Save to save this setting and return to the previous
screen.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English