Xerox 4110 System Administration Guide

Xerox 4590 EPS/4110 EPS System Administration Guide
4-54
4. Setups
System Administrator password
Set the password for System Administration mode.
KEY POINT: This is recommended for stronger security.
NOTE: The default setting of the system administrator password
is x-admin.
The System Administrator Password appears in the Login
Setup/Auditron Administration operation after Yes is selected
for using a password. Set the password after setting the System
Administrator UserID. The password can be from 4-12 numeric
digits.
1. From the System Administrator Settings screen, select
System Administrator Password.
2. To enter the new password, select Keyboard.
3. On the Keyboard screen, use either the numeric pad on the
Control Panel or the screen keyboard to enter the new
password from 4-12 numeric digits and select Save.
4. In Re-enter Password, select Keyboard again, enter the
same password, and select Save.
NOTE: To set no password, leave the password blank, and
select Save.

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English