Xerox 550 Supplementary Guide

15
1. Select [Authentication/Security Settings] on the [Tools] screen..
2. Select [Overwrite Hard Disk].
3. Select [Scheduled Image Overwrite].
4. On the [Scheduled Image Overwrite] screen, Select [Daily] or [Weekly] or [Monthly].
5. Set [Day], [Hour], [minutes],
6. Select [Save].
Set Data Encryption
1. Select [System Settings] on the [Tools] screen.
2. Select [Common Service Settings].
3. Select [Other Settings].
4. On the [Other Settings] screen, select [Data Encryption].
5. Select [Change Settings].
6. Select [On].
7. Select [New Encryption Key].
8. Enter a New Encryption Key of 12 characters using the keyboard displayed, and then select [Save].
9. Select [Re-enter the Encryption Key]
10. Enter the same passcode, and then select [Save].
11. Select [Save].
12. Select [Yes] to make the change.
13. Select [Yes] to Reboot.
Set Authentication
1. Select [Authentication/Security Settings] on the [Tools] screen.
2. Select [Authentication].
3. Select [Login Type].
4. On the [Login Type] screen, select [Login to Local Accounts] or [Login to Remote Accounts].
5. Select [Save].
When [Login to Remote Accounts] is selected in step 4, proceed to steps 6 to 12.
6. Select [System Settings] on the [Tools] screen.
7. Select [Connectivity & Network Setup].
8. Select [Remote Authentication/Directory Service].
9. Select [Authentication System Setup].
10. Select [Authentication System].
11. Select [Change Settings].
12. On the [Authentication System] screen, Select [LDAP] or [Kerberos].
13. Select [Save].
14. To exit the [Remote Authentication/Directory Service] screen, select [Close].
Set Access Control

Xerox 550 Specifications

General

Brand	Xerox
Model	550
Category	Printer
Language	English