Xerox B215 Service Manual

July 2019
6-24
Xerox® B205/B215 Multifunction Printer Service Manual
GP 7
Initial Release
General Procedures / Information
GP 7 Firmware Upgrade
Purpose
To upgrade the firmware using one of two methods. Refer to the product technical overview,
Software Upgrade Methods:
• via Xerox CentreWare Internet Services (CWIS) upgrade, remote upgrade.
• via USB upgrade.
Xerox CentreWare Internet Services (CWIS) upgrade (B215 and B205)
Download the latest software update. From the Xerox Support website at www.xerox.com/
office/B215_B205support, select the .hd file.
NOTE: The following procedure is created using the Chrome
®
Internet browser. The verbiage
may vary depending on the Internet browser used.
1. Open an Internet web browser, then type the IP address of the machine to be upgra
ded in
t
he web browser address line.
2. After the CentreWare Internet Services (CWIS) window opens, select the [
Properties]
tab, then select [Maintenance].
3. Select [
Upgrade Management].
4. Login as Administrator <d
efault>:
• Username: [ad
min]
• Password: [mach
ine full serial number]
NOTE: If the machine full serial number is incorrect, check with the customer for
a
cust
om password set by the customer.
NOTE: The <d
efault administrator password> is the [machine full serial number] by
default. If the customer has changed the default password and a [Memory Clear] has
been performed on the machine, the administrator password is reset to the default pass-
word. Change the administrator password back to the customer password as required.
5. Select [O
K], verify the [Software Upgrade Enabled] check box is selected.
6. Select [
Firmware Upgrade].
7. Click the [
Choose File] button, browse to the location of the firmware .hd upgrade file,
then select the file.
8. Click on the [I
nstall Software] button: The printer automatically initializes after the
upgrade is complete.
• A dialog box opens with a progress bar showing the percentage of file transfer com-
pletion.
• The machine will restart completing the Firmware Upgrade.
9. Check the firmware version to confirm the upgrade was successful (print a Configurat
ion
Repor
t).
NOTE: Disable Firmware Upgrades to secure t
he printer following the upgrade proce-
dure.
USB upgrade
Download the latest software update. From the Xerox Support website at www.xerox.com/
office/B215_B205support, select the .hd file.
USB FW upgrade processes for B215
1. Download the FW file onto a USB Flash drive.
2. Insert the USB flash drive into the USB host port of the device (just below the UI contro
l
panel).
3. Select [Pri
nt from USB] on the control panel.
4. Select [Ad
d File].
5. Select the firmware file for the <B215> f
rom the list displayed on the control panel, the
t
ouch the check mark.
6. Select [Pri
nt].
NOTE: [Print] will be grayed out on the UI while the device reads the file. It may take 30-
45 seconds for the device to read the file.
The UI screen will return to the Home screen before showing the [
SW Update in Prog-
ress] gas gauge.
7. After the device restarts, remove the USB flash drive.
8. A Configuration page will print, check the Configuration page to make sure the firmwa
re
upg
rade was successful.
NOTE: Look under the section De
vice Setup>System Software Version in the Configu-
ration Report. The version listed should reflect that latest firmware update.
USB FW upgrade processes for B205 (2-line LCD)
1. Download the FW file onto a USB Flash drive.
2. Install the USB Flash drive into the Flash drive port of the device (just below the cont
rol
panel).
3. Select [U
SB Print].
4. Use [Up
] and [Down] arrows to scroll to find the correct file, hit [OK].
5. Select [Y
es] for Firmware Upgrade.
NOTE: It may take 30-45 seconds for the device to read the file.
6. If screen shows Copies 1 - 9999, Hit [O
K].
The followed steps will occur:
• Flash Upgrade
• Rebooting
• System Initialize
7. A Configuration page will print, check the Configuration page to make sure the FW
upg
rade was successful.
NOTE: Look under the D
evice Setup section, System Software Version should reflect
that latest FW update.

Xerox B215 Specifications

General

Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Maximum copy resolution	600 x 600 DPI
Time to first copy (black, normal)	14 s
Scan to	E-mail, FTP, SMB, USB
Scanner type	Flatbed & ADF scanner
Maximum scan area	216 x 356 mm
Image formats supported	JPG, TIFF
Maximum scan resolution	4800 x 4800 DPI
Document formats supported	PDF
Optical scanning resolution (black)	1200 x 1200 ppi
Faxing	Mono faxing
Fax forwarding to	Fax, PC
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Digital sender	-
Printing colors	Black
Country of origin	China
Maximum duty cycle	30000 pages per month
Number of print cartridges	1
Page description languages	PCL 5, PCL 6, PostScript 3, XPS
Sustainability certificates	ENERGY STAR
Control type	Touch
Product color	Black, White
Display diagonal	3.5 \
Market positioning	Business
Paper input type	Paper tray
Total input capacity	250 sheets
Total output capacity	120 sheets
Multi-Purpose tray input capacity	1 sheets
Auto document feeder (ADF) input capacity	40 sheets
Paper tray media weight	60 - 163 g/m²
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Preprinted forms, Thicker paper, Transparencies
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Auto Document Feeder (ADF) media weight	60 - 120 g/m²
Compatibility	Xerox B215
Internal memory	256 MB
Card reader integrated	No
USB connector	USB Type-A / USB Type-B
USB 2.0 ports quantity	2
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Mopria Print Service
Power consumption (standby)	46 W
Power consumption (PowerSave)	2 W
Power consumption (average operating)	417 W
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.9 Mavericks
Server operating systems supported	Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Included cartridge capacity (black)	1500 pages
Recommended monthly print volume	3000 pages
Package weight	14000 g
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	460 mm
Width	490 mm
Height	480 mm