5. Load the paper against the right side of the tray.
• Place letterhead or pre-printed paper face up with the top edge toward the front of the tray.
• Place hole-punched paper with the holes toward the right side of the tray.
Note: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
6. Close the side gate, then close Tray 6.
7. At the control panel, select the correct type and color.
• If letterhead paper is loaded in the printer, for type, select Letterhead.
• If pre-printed paper is loaded in the printer, for type, select Pre-printed.
8. To confirm the settings, touch Confirm.
206
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General
