7. Place the new transfer roller in the printer as shown. Press down until the transfer roller clicks into
place.
8. Remove the protective cover from the transfer roller, then close Door A.
FFaann FFiilltteerr
RReeppllaacciinngg tthhee FFaann FFiilltteerr
When it is time to replace the fan filter, the printer displays a message on the control panel.
1. Remove the new fan filter from the packaging. Retain the packaging.
2. To remove the fan filter cover, press down on the R9 cover release tab, then lift the cover away
from the printer.
254
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
