6.6 Error Messages (in Alphabetical Order) 115
6.6 Error Messages (in Alphabetical Order)
This section describes the messages displayed on the control panel.
Messages About Consumables
Message Condition/Reason/Action
Reboot Printer
(010-317)
The fuser unit is not installed. Install the fuser unit.
Refer to
• "Replacing the Fuser" (P. 128)
093-NNN
Check XXX Cartridge
XXX=Yellow, Magenta, Cyan, or
Black
Sealing tape is still attached to the XXX print cartridge. Remove the sealing tape
from the displayed print cartridge.
093-NNN
XXX Cartridge Error
XXX=Yellow, Magenta, Cyan, or
Black
The XXX print cartridge is not installed correctly or is not working correctly due to
damage or malfunction. Reinstall the print cartridge.
Refer to
• "Replacing the Print Cartridges" (P. 125)
094-320
Belt Unit Error
The belt unit is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the belt unit.
Refer to
• "Replacing the Belt Unit" (P. 134)
Reboot Printer
(010-359)
The fuser unit is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the fuser unit.
Refer to
• "Replacing the Fuser" (P. 128)
Install XXX
Print Cartridge
XXX=Yellow, Magenta, Cyan, or
Black
The XXX print cartridge is not installed. Install the XXX print cartridge.
Refer to
• "Replacing the Print Cartridges" (P. 125)
Install
Belt Unit
The belt unit is not installed. Install the belt unit.
Refer to
• "Replacing the Belt Unit" (P. 134)
010-351
Replace Fuser
Time to replace the fuser unit. Replace the old fuser unit and the old feed roller with a
new one.
Refer to
• "Replacing the Fuser" (P. 128)
• "Replacing the Feed Roller" (P. 130)
Ready to print
XXX Cartridge
Ready to print
Replacement Time
XXX=Yellow, Magenta, Cyan, or
Black
The XXX print cartridge is nearly empty. Purchase a new print cartridge.
Refer to
• "Replacing the Print Cartridges" (P. 125)
To Next Page
Loading...
Need help?
General