4.1 About Paper 71
Unsupported Paper
Do not use the following types of paper or media. They can cause paper jams or printer
failure.
• Transparency sheets other than those recommended. (Fuji Xerox Full Color
Transparencies or the similar types)
• Ink jet paper, ink jet transparencies, or ink jet postcards
• Paper that is too heavyweight or too lightweight
• Paper pre-printed with other printer or copier
• Wrinkled, creased, or ripped paper
• Damp or wet paper
• Lumpy or curled paper
• Static-cling paper
• Pasted-up or glued paper
• Postcards with pre-printed pictures
• Specially coated paper
• Color paper with surface treatments
• Paper that is coated with anti set-off white powder (micro powder)
• Paper that has perforations
• Paper that uses ink that deteriorates with heat
• Photosensitive paper
• Carbon paper
• Paper with staples, clips, ribbons, or tape
• Paper with rough surface, such as pulp paper or fibrous paper
• Acid paper (Texts printed on acid paper may blur. In such case, use alkaline paper
instead.)
• Envelopes that are not flat, or that have clasps
• Label paper with some labels already peeled off
• Tack film
• Water transfer paper
• Textile transfer paper
Important
• If you load postcards with pre-printed pictures, the anti set-off powder sticks to the feed rolls, preventing
the postcards from being fed properly.
Label
(non-cut)
- Labels Non-cut self-adhesive label sheets.
Envelope - Envelope Commercially available envelopes.
Refer to "Supported Paper Sizes and Types" (P. 69)
for the supported envelope sizes.
Product Name G.S.M.
Paper Type
Menu Name
Description
To Next Page
Loading...
Need help?
General