Xerox DocuPrint C3300 DX User Manual

86 5 Control Panel Menus
Protocol Select [Enable] when using the protocol. When [Disable] is selected, the protocol
cannot be activated.
• [LPD] (default: [Enable])
• [Port9100] (default: [Enable])
• [IPP] (default: [Enable])
• [SMB (TCP/IP)] (default: [Enable])
• [SMB (NetBEUI)] (default: [Enable])
• [FTP] (default: [Enable])
• [NetWare]-[NetWare IP] (default: [Enable])
• [WSD] (default: [Enable])
• [E-mail Printing] (default: [Enable])
• [SNMP]-[SNMP (UDP/IP)] (default: [Enable])
• [StatusMessenger] (default: [Enable])
• [InternetServices] (default: [Enable])
• [Bonjour (mDNS)] (default: [Enable])
• [Telnet] (default:[Enable])
• [HTTP - SSL/TLS] (default: [Disable])
Note
• [HTTP - SSL/TLS] appears only when a certificate is registered on the printer.
For details on encrypting HTTP communication and a certificate required for the
printer, refer to "SSL Data Encryption for HTTP Communication" (P. 146).
• [HTTP - SSL/TLS] does not appear on the model available in China.
IP Filter Specifies blocking the reception of data from certain IP addresses.
No. n
(n: 1 to 5)
You can set up to five IP addresses ([No. 1] to [No. 5]). [No. 1] has priority over the
others. To set multiple filters, set IP address in descending order from the address
network with the narrowest range.
• [Address]
Enter the IP addresses using numbers between 1 and 255. The first xxx, however,
cannot be 127 or a number between 224 and 255.
• [Mask]
Enter the subnet masks using the following numbers:
0, 128, 192, 224, 240, 248, 252, 254, and 255.
• [Mode]
Sets the restriction conditions for the addresses from [Off] (default), [Accept], or
[Reject].
Note
• [IP filter] can be set also on CentreWare Internet Services. For details, refer to
"Controlling Data Reception by IP Address" (P. 150).
IEEE 802.1x Disables the IEEE 802.1x feature.
Note
• [IEEE 802.1x] appears only when the feature is enabled.
• [IEEE 802.1x] appears when using the wired network only.
• [IEEE 802.1x] does not appear on the model available in China.
Initialize NVM Initializes network data stored in NVM. The NV memory is nonvolatile memory that
retains the settings of the printer even when its power is switched off. Initializing the NV
memory will return each item of the [Wired Network] menu to its default value.
Item Description

Xerox DocuPrint C3300 DX Specifications

General

Brand	Xerox
Model	DocuPrint C3300 DX
Category	Printer
Language	English