5.2 Description of Menu Items 99
Tray 1 / Tray 2
Specifies the settings for the paper loaded in the paper tray.
Note
[Tray 2] appears only when optional sheet feeder is installed.
Note
• When the size or type of paper that is loaded in the tray is different from the setting on the control panel,
print quality may deteriorate or a paper jam may occur. Specify the correct paper type and size on the
control panel.
• When installing the optional sheet feeder and [Paper Tray] is set to [Auto Paper Select] on the print
driver, the feeding tray is automatically specified according to the setting on the control panel. Also,
when the paper size and type setting for each tray is the same, printing continues by changing the
feeding tray if the paper in the specified tray has run out.
Item Description
Paper Type Sets the type of the paper loaded in the paper tray.
• [Plain Paper] (default), [Recycled Paper], [Bond Paper], [Heavyweight 1],
[Heavyweight 2], [Labels], [Coated 1], [Coated 2], [Coated 3]
Refer to
• "Setting the Paper Type" (P. 76)
Paper Size Sets the paper size of the paper loaded in the paper tray.
• [Auto] (default)
Automatically detects the paper size.
•[Custom Size]
Sets the length and width of the paper.
Refer to
• "Setting the Paper Size" (P. 77)
Display Screen Sets whether or not to display a message that prompts you to set the paper size and
type every time you load paper in the paper tray.
When you select [On], the message that prompts you to set the paper size and type is
displayed.
• [On] (default)
•[Off]
To Next Page
Loading...
Need help?
General