Maintenance
Phaser 3610, WorkCentre 3615 Service Manual6-2
Service Maintenance Procedure
Maintenance Safety
• Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your printer.
• Do not use aerosol cleaners. Clean the printer with a dry lint-free cloth only.
• Do not burn any consumables or routine maintenance items. For information on Xerox
supplies recycling programs, go to www.xerox.com/gwa.
Perform the following procedures whenever you check, service, or repair a printer. Cleaning the printer,
assures proper operation of the printer and reduces the probability of having to service the printer in
the future.
Note: The frequency of use, the type of paper printed on, and operating environment are factors
in determining how critical cleaning the printer is and how often it is necessary.
Recommended Materials
• Toner vacuum cleaner
•Clean water
• Clean, dry, lint-free cloth
• Black, light protective bag
Repair, Inspect, and Prevent (RIP) Procedure
Perform these routine maintenance procedures during the course of servicing the printer.
• Clean the Feed Rollers, Transfer Rollers, and Paper Guides; and replace if necessary.
• Remove and clean the paper trays.
• Print a Configuration and Error History pages; diagnose, and repair any problems as indicated.
• Check cleanliness of the interior and exterior, including Fans; if necessary, clean (dust or
vacuum) these areas.
• Review proper printer operation using a customer file, if possible. Check with the customer
regarding any special applications they may be using.
• Review with the customer all work that was performed and discuss proper printer care.
To Next Page
Need help?
General
Weight and Dimensions
