To Next Page

To Previous Page

Phaser™ 4500 Laser Printer

3-36

Novell NetWare

This topic includes:

■ "Configuration Software for NetWare Networks" on page 3-36

■ "Quick Setup" on page 3-36

■ "Advanced Setup" on page 3-36

■ "NetWare 4.x, NetWare 5.x, and NetWare 6.x Print Server Setup" on page 3-37

■ "Novell NetWare Troubleshooting" on page 3-37

Configuration Software for NetWare Networks

CentreWare DP configures the printer and the network when using NetWare 4.x, 5.x, and 6.x.

CentreWare

DP is a Novell Directory Service (NDS)/Bindery tool used only for Novell

Distributed/Enterprise Print Services (NDPS).

Quick Setup

1. Print the “Configuration Page” and keep it for reference. For information about printing a

“Configuration Page”, go to Reference/Features/Front Panel on the User Documentation

CD-ROM.

2. View the “Configuration Page”, then verify the following:

■ Novell enable is On

■ Frame Type is correctly set.

3. Install CentreWare DP on a Windows-based workstation.

4. Run the CentreWare DP application, then click Setup Wizard on the Printer menu.

5. Select NDS Install, then follow the Setup Wizard steps.

6. Install printer drivers from the Printer Installer and Utilities CD-ROM.

7. Send a print job to the printer.

8. Verify the print-quality of the document. If print-quality problems exist, or if your

document did not print, go to Reference/Troubleshooting on the User Documentation CD-

ROM for more information.

Advanced Setup

The Advanced Setup option of CentreWare DP is a tool that allows you to control how your

devices are configured in your Novell NetWare network environment. This tool is necessary

for connecting your device to more than one file server or queue. For a connection to a single

device and queue, use Setup Wizard.

Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 4500 Reference Guide

Other manuals for Xerox Phaser 4500