Xerox Phaser 4500 Reference Guide

Printer Settings
Phaser™ 4500 Laser Printer
1-16
7. Click Save Changes at the bottom of the screen.
Selecting Tray Settings
You can select trays by two different methods:
■ The printer’s front panel
■ CentreWare IS
Using the Front Panel
To specify tray selection:
1. At the printer’s front panel, select Printer Setup, then press the OK button.
2. Select Paper Handling Setup, then press the OK button.
3. Select Paper Source, then press the OK button.
4. Scroll to the desired tray or Auto Select.
5. Press the OK button to save the changes.
Note
The driver overrides the front panel settings and CentreWare IS for tray selection.
Using CentreWare IS
To select a default tray:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Select Properties.
4. Select the General folder on the left sidebar.
5. Select Printer Defaults.
6. Scroll to Print Mode Settings, then select the tray from the Paper Source drop-down list.
7. Click Save Changes at the bottom of the screen.
Tray Switching
Tray switching is the printer’s ability to switch between trays that have the same paper type
and size when a tray runs out of paper.
Tray switching is controlled by the printer driver, front panel, or CentreWare IS.
PCL jobs always use tray switching, but PostScript jobs disable tray switching when a specific
tray has been selected as the paper source.
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 4500 Specifications

General

Brand	Xerox
Model	Phaser 4500
Category	Printer
Language	English