Xerox VersaLink B600 User Manual

3. If the Windows Found New Hardware Wizard appears, press CCaanncceell.
4. Install the print driver.
CONNECTING TO A WIRED NETWORK
1. Ensure that the printer is powered off.
2. Attach a Category 5 or better Ethernet cable from the printer to the network or router socket. Use an Ethernet
switch or router, and two or more Ethernet cables. Connect the computer to the switch or router with one cable,
then connect the printer to the switch or router with the second cable. Connect to any port on the switch or
router except the uplink port.
3. Attach the power cord, then plug in the printer and power it on.
4. Set the network IP printer address, or set up the printer for automatic printer IP detection. For more
information, refer to the System Administrator Guide at www.xerox.com/support/VLB600_VLB610support.
CONNECTING TO A WIRELESS NETWORK
A wireless local area network (WLAN) provides the means to connect 2 or more devices in a LAN without a physical
connection. The printer can connect to a wireless LAN that includes a wireless router or wireless access point. Before
connecting the printer to a wireless network, the wireless router must be configured with a service set identifier
(SSID) and any necessary credentials.
Note: Wireless networking is available only on printers with the optional Wireless Network Adapter installed.
Configuring the Printer for a Wireless Network
Note: Before you configure wireless network settings, install the Xerox
®
Wireless Network Adapter Kit.
If you purchased and installed a Wireless Network Adapter Kit, you can connect the device to a wireless network. If
the device is connected to a wired network, you can configure wireless networking at the device, or use the
Embedded Web Server. For details on configuring wireless network settings, refer to the System Administrator Guide
at www.xerox.com/support/VLB600_VLB610docs.
After the Wireless Network Adapter is installed, remove it only as necessary. For information on removing the
adapter, refer to Removing the Wireless Network Adapter.
Installing the Wireless Network Adapter
The optional Wireless Network Adapter plugs in to the back of the printer. After the adapter is installed, and
wireless networking is enabled and configured, the adapter is able to connect to a wireless network.
To install the Wireless Network Adapter:
Xerox
®
VersaLink
®
B600/B610 Printer User Guide 39
Getting Started

Xerox VersaLink B600 Specifications

General

Package weight	28000 g
Country of origin	Vietnam
Maximum resolution	1200 x 1200 DPI
Optional connectivity	Wireless LAN
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Sustainability certificates	ENERGY STAR
Operating relative humidity (H-H)	10 - 85 %
Printing colors	Black
Maximum duty cycle	250000 pages per month
Recommended duty cycle	0 - 20000 pages per month
Number of print cartridges	1
Page description languages	HP-GL, PCL 5e, PCL 6, PostScript 3, TIFF, XPS
USB port	Yes
Package depth	634 mm
Package width	580 mm
Package height	607 mm
Print technology	Laser
Warm-up time (from sleep mode)	35 s
Time to first page (black, normal)	6.3 s
Print speed (black, normal quality, A4/US Letter)	55 ppm
Duplex print speed (black, normal quality, A4/US Letter)	49.3 ppm
Paper input type	Paper tray
Total input capacity	700 sheets
Total output capacity	150 sheets
Custom media width	76.2 - 190 mm
Custom media length	216 - 356 mm
Duplex media weight	60 - 176 g/m²
Paper tray media types	Bond paper, Card stock, Envelopes, Labels, Letterhead, Plain paper, Recycled paper
Paper tray media weight	60 - 220 g/m²
Maximum ISO A-series paper size	A4
Wi-Fi	-
Cabling technology	10/100/1000Base-T(X)
Security algorithms	256-bit AES, FIPS 140-2, SNMPv3, SSL/TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Mopria Print Service
Supported network protocols (IPv4)	TCP/IP, HTTP/HTTPS, Internet Printing Protocol, LPR/LPD, Raw Socket Printing/Port 9100, IPv4/IPv6, WSD LDAP, FTP
Processor cores	2
Processor family	ARM Cortex
Sound power level (standby)	27.1 dB
Sound pressure level (printing)	56.8 dB
Current rating	8 A
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.3 W
Power consumption (standby)	72 W
Power consumption (printing)	900 W
Control type	Touch
Product color	White
Market positioning	Business
Mac operating systems supported	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Server operating systems supported	Windows 2000 Server, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Cables included	AC
Included cartridge capacity (black)	1 pages
Compatibility	VersaLink B600/B610

Weight and Dimensions

Depth	465.5 mm
Width	427.4 mm
Height	443.4 mm