1. Pull out the tray until it stops. Wait for the tray to lower and stop.
2. Fan the edges of the paper before loading it into the paper trays. This procedure separates any sheets of paper
that are stuck together and reduces the possibility of paper jams.
Note: To avoid paper jams and misfeeds, do not remove paper from its packaging until necessary.
3. Stack the paper against the left-rear corner of the tray.
• Insert letterhead and pre-printed paper face up with the top edge toward the back.
• Load hole-punched paper with the holes to the left.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 173
Paper and Media
To Next Page
Loading...
Need help?
General
