Troubleshooting
Xerox
®
WorkCentre
®
7220/7220i/7225/7225i Color Multifunction Printer 265
User Guide
Symptoms Probable Causes Solutions
Fax was not transmitted. The fax number is wrong. Verify the fax number.
The telephone line is connected
incorrectly.
Verify the telephone line connection. If
the telephone line is disconnected,
connect it.
There is a problem with the fax
machine of the recipient.
Contact the recipient.
The fax feature is not installed or is not
enabled.
Ensure that the fax feature is installed
and enabled.
Server fax is enabled. Ensure that server fax is disabled.
An access number is required to
connect to an outside line.
If the printer is connected to a PBX
system, it could be necessary to enter a
number to access the outside telephone
line.
The fax number needs a pause
between the prefix for an outside line
and the telephone number.
To insert a pause, press the
button. A comma (,) appears in the
corresponding location.
If the problem persists, for online support information, go to
www.xerox.com/office/WC7220_WC7225support.
Problems Receiving Faxes
Symptoms Probable Causes Solutions
The fax received by the recipient
is blank.
There is a problem with the telephone
connection or with the fax machine of
the sender.
Verify that the printer can make clean
copies. If it can, have the sender fax
the document again.
The sender loaded the pages
incorrectly.
Contact the sender.
The printer answers the call but
does not print the fax.
The memory is full.
To increase available memory, delete
stored jobs and wait for the existing
jobs to complete.
The received fax size is reduced
in size.
The paper supply in the printer does
not match the document size sent.
Confirm the original size of the
documents, then load the appropriate
paper size in the printer.
To Next Page
Loading...
Need help?
General
