Paper and Media
58 Xerox
®
WorkCentre
®
7220/7220i/7225/7225i Color Multifunction Printer
User Guide
− For clear or stripe-less transparencies, load face down with the long edge leading into the
printer. For striped transparencies, load face up with the non-stripe edge leading into the
printer.
− For short-edge feed, insert letterhead and pre-printed paper face up with the top edge leading
into the printer.
− Load hole punched paper with the holes toward the rear of the printer.
− Load labels face down with the top edge to the left.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
5. Adjust the width guides until they touch the edges of the paper.
6. Do one of the following:
− To confirm the paper size, type, and color when a tray is set to Fully Adjustable, touch Confirm.
− To select a new paper size, touch Size. To select a new paper type, touch Type. To select a new
paper color, touch Color. When finished, touch Confirm.
To Next Page
Loading...
Need help?
General
