To Next Page

To Previous Page

XFX nForce 790i Ultra 3-Way SLI Motherboard

 FDD

 IDE

 Serial ATA II

 Chassis Fans

 Rear panel USB 2.0 Adapter

 Expansion slots

 CMOS jumper settings

See Figure 1 on page 5 to locate the connectors and jumpers referenced in the

following procedure.

Power Connections

To support 3-way SLI, this motherboard has the following specific power

supply requirements:

 Minimum 1000 W peak power

 Six 6-pin (3x2) PCI-E power connectors (see Figure 3):

6-pin (3x2) PCI-E connector

Figure 3. Power Supply Connectors

Make sure you have enough power to cover all the expansion cards you will be

installing. To determine what you power requirements are for your specific

configuration or a certified power supply vendor, refer to www.slizone.com.

Questions and Answers:

Need help?

Do you have a question about the XFX nForce 790i Ultra and is the answer not in the manual?

XFX nForce 790i Ultra Specifications

General