XFX nForce 790i Ultra 3-Way SLI Motherboard
68
NVIDIA Performance Group
of NVIDIA Control Panel
You can start the NVIDIA Performance Group several ways:
Double-click the NVIDIA Performance Group icon on the desktop
Right-click on the desktop and select NVIDIA Control Panel
From the Windows Control Panel, double-click the NVIDIA Control Panel
NVIDIA Performance Server menus are located under the Performance group
in the left column.
Note All changes made within NVIDIA Performance Group are dynamically
applied, and will only remain active for the current Windows session. You
can save these settings as a profile by using the Profile menu item.
CAUTION: Increasing the voltage or the clock speed of a component may void its
warranty due to exceeding recommended specifications. XFX and the board
manufacturer are not responsible for damage that may occur when component
tolerances are exceeded.
Historically, NVIDIA’s Control Panel has contained a wealth of settings and
adjustments for NVIDIA based components. In similar fashion, the new
NVIDIA Performance Group applies the same depth of control to the rest of
the components within a system. Without ever leaving Windows or entering the
BIOS, users can optimize and adjust nearly every system component.
To Next Page
Loading...
Need help?
General
