Xinje DP3C Series User Manual

12
3-6. Power supply terminal
Diagram
Pin
Name
Explanation
1
GND
Power supply ground
2
VDC
Power supply positive input
Note: the power cable diameter of Xinje standard is 0.75mm
2
.
DP3C-305 range 20~50VDC: recommended value is 24~36VDC.
DP3C-705 range 20~50VDC: 57 motor recommended value is 24~36VDC, 86 motor or high-speed application
recommended value is 48V.
DP3C-808 range 20~80VDC: recommended value is above 48V.
3-7 Upper computer communication port
The definition of RS232 interface pin arrangement is shown in the following table:
Diagram
Pin
Function
Notes
1
TXD
RS232 send
2
RXD
RS232 receive
3
GND
RS232 ground
Note: please use the cable supplied by Xinje company.
RS232 default communication parameters: baud rate 115200bps, 8 data bits, 1 stop bit, even parity, station no.1.

Xinje DP3C Series Specifications

General

Brand	Xinje
Model	DP3C Series
Category	Servo Drives
Language	English