Xinje DS3 Series Manual

41
Optocoupler type
Relay type
Servo drive upper device
COM
SO
X3
COM
0V
+24V
Servo drive upper device
+24V
0V
COM
X3
SO
COM
Note: max load current 400mA (if control the brake motor by SO signal, please confirm the
brake current, if it is larger than 400mA, please use intermediate relay). 750w and above
power motor is recommended to use intermediate relay.
 Analog input circuit
DS3-2□P□-PQA
DS3-4□P□-PQA
Upper device servo drive
+10V
-10V
11 T-REF
12 V-REF
13 GND
0V
R=13KΩ
2KΩ
1W
Analog signal is speed command or torque command. Input
impedance:
• speed command input: about 13KΩ
• torque command input: about 13KΩ
• max allowable voltage of input signal is ±10V
Note: DS3E/DS3L series servo cannot support analog input.

Xinje DS3 Series Specifications

General

Brand	Xinje
Model	DS3 Series
Category	Servo Drives
Language	English