3. Enter the Maintenance mileage reset menu.
4. Input reasonable value of mileage and press OK.
Figure 5-3 Sample of oil reset function (screen 2)
5. Message of ‘Reset success’ displayed when Oil Reset function has
successfully performed.
5.2 EPB
Electronic Parking Brake (EPB) System reset is a popular special function.
You can use this function to reset the electronic parking brake system and
brake pads, which also supports the brake pad replacement (retraction,
release of the brake pump), G-sensor, and body angle calibration. This
function has multiple uses and can safely and effectively maintain the
electronic brake system. These applications include deactivating and
activating brake control systems, assisting in controlling brake fluid,
opening and closing brake pads, setting brakes after replacing brake discs
or brake pads, etc.
1. If the brake pad wears the brake pad sense line, the brake pad sense
line will send a signal to the onboard tablet asking for replacing the
brake pad. After replacing the brake pad, you must reset the brake
pad. Otherwise, the car alarms.
To Next Page
Loading...
Need help?
General
